- Table of contents
- Zone Management
- Secure Zone Transfers
- Checking Servers
Adding a Zone¶On each DNS server, master zone can be created/updated on /etc/bind/masters/. The ownership needs to be:
- banya: if a user zone which should be updatable via the Banya service
- root:bind in all other cases
The zone is declared in host_vars/<dnsserver>/dns.yml and the playbook playbooks/tenants/duckcorp/dns.yml is in charge of updating all configurations (see the bind9 role documentation to understand the parameters). Only the zone content is not Ansible managed.
Updating a Zone¶
Edit the file /etc/bind/masters/<zone-name>.zone on the primary master (Orfeo for all zones except DuckLand zones using Elwing).
Do not forget to update the serial!
Better to check the file validity before publishing the zone:
named-checkzone <zone-name> <zone-file>
Then to publish the zone (DNSSEC-signed zones too):
rndc reload <zone-name>
In case the zone is DNSSEC-signed, the publishing of keys in the parent zone is to be done manually (not automated yet); more details below.
Reseting the Zone Serial¶
The serial needs to be increased by steps, as described in this article.
Secure Zone Transfers¶
To secure zone transfers, a TSIG key needs to be created and added on both sides. Beware the key name must be identical on both side.
DNS server groups (servers allowed to request transfer) and keys can be defined in host_vars/<dnsserver>/dns.yml and host_vars/<dnsserver>/dns.vault.yml respectively. If they are to be used on all servers, then you can declare them in group_vars/dns_servers/dns.yml and group_vars/dns_servers/dns.vault.yml respectively.
You can a new key using:
dnssec-keygen -a HMAC-SHA512 -b 512 -n HOST taiste
Take the 'Key' part in 'Ktaiste.*.private' file, to put into the configuration.
The same playbook (playbooks/tenants/duckcorp/dns.yml) is used to update the configuration.
Here are notes about using Bind KASP (version 9.16 required).
All general info above about DNSSEC does not change, especially the rollover steps are similar even if the tooling change, and testing the zone is identical.
The Ansible bind role has been updated in a branch to be able to use Bind KASP for DNSSEC. Our Ansible repository now tracks this branch and add the necessary parameters to use it. Please look at the role's documentation to understand the inner technical details, this page is about administration of the solution.
Introduction¶Better read some documentation before fiddling with the controls:
- Bind DNSSEC Guide
- KSK Rollover (key is manually created instead of using `dnssec-keymgr` but it's a good example)
- Future KSK Rollover Automation
Key materials are created on-demand by Bind using the policy parameters, so no need to do anything outside Ansible configuration of the zones and policy parameters. Cleanup of old keys when they become obsolete or when a zone is removed is not yet done though.
Notes about migrating from a previous version (historical)¶
It is important to cleanup old keys first if switching from dnssec-keymgr to dnssec-policy or old keys would get in the way.
More generally look at this ticket tracking the problems we encountered
As Bind is not using the usual date-based zone serial, it can be less misleading to reset the serial before migration (see dedicated chapter above).
General zone info, including the real published serial (after signing, resigning if it happens, rollovers…) and planned signing events:
rndc zonestatus <zone-name>
To know which keys (<key-id>) are currently signing a zone (may be inactive and not deleted yet):
rndc dnssec -status <zone-name>
Keys are stored in /etc/bind/keys and you can use the key ID to locate the corresponding file this way:
Inside you can read the key type (KSK/ZSK) and the lifetime schedule (so important rollover dates).
The KASP is in charge of the key maintenance according to the policy. It is possible to alter the timing using the dnssec-settime tool in case of bugs but that should not be needed.
In this case, after doing the modifications, Bind needs to be notified using:
rndc loadkeys <zone-name>
Parent Zone Publishing¶
To see if the zone KSK keys are properly published in the parent zone:
To get a view of the schedule:
rndc dnssec -status <zone-name>
To have a list of KSK keys that needs publishing on the parent zone:
The ZSK key rollover is handled automatically by Bind (KASP), so admins have nothing to do.The KSK rollover implies contact with the parent zone:
- if we do not manage the parent zone:
- if the parent zone handles CDS/CDNSKEY (RFC 7344) then it will grab the new DS automagically (but most TLDs do not support it yet)
- else a manual step to get the DS entry in their zone is needed (manually in their UI, maybe via an API)
- if we manage the parent zone:
- if the zone publishes the CDS/CDNSKEY RRs (all our zones have them) then we simply need to define the list of dnssec_children in the parent zone configuration (see bind9 role documentation) and a script will make the update
- else we need to organize with the tenant on a method to exchange the DS
KSK Rollover Workflow¶
We use the Double-Signature method with some overlap of DS publishing.Here are the states and what needs to be done:
- created state:
- new created key (new zone or key replacement), this key is not used yet
- action: wait
- publish state:
- the is added to the zone but not used to sign yet
- after the zone default TTL has passed, it is considered published
- action: wait for propagation
- active state:
- the key is used for signing
- action: export the key either (depending on the registrar):
- DS: in digest format using the dnssec-dsfromkey -2 <ksk-filename> command (see previous chapter to get the absolute filename for the current KSK key, any of the key or private file would do)
- full key: in <ksk-filename> the <key> is on a line formated like <zone-name> <ttl> IN DNSKEY <flags> <protocol> <algorithm> <key> (<flags>, <protocol> and <algorithm> are three numbers, the rest is the <key>; you can copy it with the spaces)
- action: add the key to the parent zone
- after the DS TTL has passed, it is considered published and the zone is secured with the key
- action: wait for the next rollover
- inactive state:
- the key is no more used to sign but still published
- action: remove the DS key from the parent zone
- deleted state:
- the key is not published anymore
- action: when you're sure everything went fine, purge old keys (should be automated some day)
Currently we need to check manually when to do the KSK rollover. The coverage command above and next key event in the zone info should help build a little script to warn us in time.
The plan in the long run is to use CDS/CDNSKEY (RFC 7344). Some interesting reading about an implementation:
Checking a Zone¶
Test a Zone using a DNSSEC-enabled resolver:
dig <zone-name> +dnssec
You need to get the ad flag. If you get the aa flag, then you're interrogating one of the official NS for the zone, then try on another server to be sure your configuration is OK (remotely with @<server> as first command option).Test a Zone using an external web tool:
Forcing a policy change to be applied at once¶
Via Ansible it is possible to change the policy directly and Bind should trigger the changes automagically. Currently we have not tested a change of policy with KASP.yet. We would like to test an algorithm rollover but we're waiting for some other bugs to be fixed first.
Unsecuring a Zone¶
First the DS needs to be removed from the parent zone, then we need to wait for the DS TTL to expire (and it's probably better to wait a few days for Inetrnet caches to expire) before unsigning (which can be done by changing the zone's dnssec_policy to insecure in the Ansible configuration). It has not been tested yet since we never had the need.
Key materials need to be removed manually.
Forcing an Early Rollover¶
It is possible to do so: https://blog.webernetz.net/dnssec-ksk-emergency-rollover/
You can trigger an immediate change of KSK (with <key-id> the ID of the key you wish to replace):
rndc dnssec -rollover -key <key-id> <zone-name>
There is currently a bug so it may take up to a week to trigger.
Should return a A record and have the ad flag set:
dig sigok.verteiltesysteme.net @127.0.0.1
Should return SERVFAIL:
dig sigfail.verteiltesysteme.net @127.0.0.1
receive_secure_serial: not exact¶
This means the inline-signing journal is corrupted and changes to the zone cannot be applied to the signed zoned.
rndc sync -clean <zone> rndc stop
then bump the zone's serial and restart Bind, it should have solved the problem.
If this does not work:
systemctl stop bind9 rm /var/cache/bind/masters/<zone>.zone.* systemctl start bind9